DMP Electronics XR2500F - Manual (Page 58)

Digital Monitoring Products XR2500F Installation Guide
50
RevIsIons
Revisions to This Document
This section explains the changes made to this document during this revision. It lists the version and
identifies the change(s) made, the related section number and section heading, and a summary of the
change.
Ver Section Number and Heading Quick Explanation of Changes
1.03 31.4 Bell Added mercantile information
32.4 Mercantile Safe & Vault Removed section
32.4 Bell Added mercantile information
32.6 Bank Safe Removed section
1.02 The following changes were implemented for ANSI/UL 864 9th Edition compliance
Complete Document Removed all references to the 504-24 Power Supply
1.1 Overview Added reference to optional power supply
1.3 Power Specifications Added reference to Compliance Instruction section
1.7 LX-Bus Added reference to 463G
1.8 Outputs Added output rating
1.11 Compliance Instructions Added section
2.6 Wiring Diagram Removed 504-24, 24 VDC batteries, and transformer
Updated Types of Service
3.1 Transformers and AC Power Removed 100 VA transformer
5.2 Connection Added reference to optional power supply
Updated Figure 5 for Notification Appliances
5.4 Notification Appliances Moved to Compliance section
6.8 Power Requirements Updated 710, 711, 716, 866, and 867 current draw
7.4 Digital Dialer Added maximum impedance
10.1 Wiring Diagram Replaced 790F keypad with 630F
10.3 Accessory Devices Added 463G, updated 865, 866, 867, and 869 descriptions, removed
reference to 690F, and 790F.
11.7 Standby Battery Calculations Added 463G, and 7100 keypads
11.8 Standby Battery Selection Added 341, and 352S as optional battery enclosures
12.1 Terminal 5 and 6 Added reference to Notification Appliance section
13.2 Terminal 7 - RED Added reference to Power Supply section
15.1 Terminals 25-26 and 27-28 Added maximum voltage, maximum normal standby, maximum line
impedance, and ground fault detection
17.2 Contact Rating Added power factor statement
18.1 J11 Description Added maximum ratings
18.3 Model 860 Relay Module Added power factor statement
19.1 J23 Description Added Wireless Bus reference
24.1 Listed Compliance Specification Added section
25.8 - 26.12 Universal Burglary Added sections
27.7 Wireless Audible Added section
28.8 - 28.13 ANSI/UL 1610 Added sections
29.1 - 29.8 ANSI/UL 636 Added sections
31.8 - 31.13 ANSI/UL 365 Added sections
32.1 - 32.7 ANSI/UL 609 Split from ANSI/UL 365
35.1 Power Supply Added section
35.9 Fire Protective Signalling Updated to reflect current panel programming options
35.10 - 35.14 ANSI/UL 864 Added sections
38.4 Communication Programming Updated to reflect current panel programming options
39.1 - 39.7 Wiring Diagrams Added wiring diagrams
39.10 Wiring Diagrams Added reference to 463G
39.11 Wiring Diagrams Removed reference to 867 module