Basler Electric IDP-1200 - Manual (Page 85)

9437200990 Rev C 77
Specifications
IDP-1200 specifications are listed in the following paragraphs.
Control Power
Nominal Voltage ......................... 24 Vdc
Voltage Range ........................... 19.2 to 28.8 Vdc
Typical Current Draw ................. 1.30 Adc at 24 Vdc
Display
Type ........................................... TFT color LCD
Size ............................................ 12.1 in (307.3 mm), measured diagonally
Resolution .................................. 800 (wide) by 600 (high) pixels
Color ........................................... 65 k
Communication Interfaces
Ethernet
Type ........................................... Ethernet, IEEE 802.3u, 10Base-T/100Base-TX
Connection ................................. RJ-45 jack
USB
Type ........................................... Conforms to USB1.1 (TYPE-A) x 2
Power Supply Voltage ................ DC 5 V ±5 %
Output Current ........................... 500 mA or less
Communication Distance ........... 5 m or less
Environment
Operating Temperature .............. 0 to 50
°C (32 to 122°F)
Storage Temperature .................
–20 to 60°C (–4 to 140°F)
Humidity ..................................... 10 to 90%, non-condensing
Vibration and Shock Resistance
Vibration
Complies with IEC 61131-2
Withstands.................................. 5 to 9 Hz single-amplitude, 3.5 mm
9 to 150 Hz constant-accelerated velocity, 9.8 m/s 2
X, Y, and Z directions for 10 cycles (100 minutes)
Shock
Complies with IEC 61131-2
Withstands.................................. 147 m/s
2 in X, Y, and Z directions, 3 times
IDP-1200 Specifications