Basler Electric IDP-1200 - Manual (Page 78)

70 9437200990 Rev C
Figure 74. Relocation of Doorstop
8. Secure the IDP-1200 to the mounting bracket by performing the procedure of Securing the IDP-
1200.
Securing the IDP-1200
The IDP-1200 is secured to the mounting bracket with four hook-and-screw fasteners. The hook of each
fastener is inserted in one of four display panel insertion slots (Figure 75) and the fastener screw is
tightened against the mounting bracket (Figure 76).
Caution
Over-tightening the fastener screws will damage the display panel
housing. Maximum screw torque is 4.43 in-lb (0.5 N
•m).
Mounting IDP-1200