Basler Electric IDP-1200 - Manual (Page 39)

9437200990 Rev C 31
11. Tap on the password box in the center of the page and enter the appropriate password. (The
default password is “5678”. On the popup control, use the Down arrow to toggle between letters
and numbers.)
12. Press the Start button located in the center of the page.
13. Press the Yes button when asked to download the data. Downloading settings from a USB flash
drive to the IDP-1200 takes approximately three minutes.
14. After completion of the download, press the Back button located at the bottom of the page.
15. Press the Back button again.
16. Press the Exit button at the bottom of the page.
17. Press the Yes button when prompted to restart the system.
IDP-1200 IDP-1200 Operation with ECS2100 and ECS/RW