Basler Electric IDP-1200 - Manual (Page 71)

9437200990 Rev C 63
Figure 67. Stiffener Cutting Dimensions
7. Using the cutting dimensions illustrated in Figure 68, enlarge the door cutout to accommodate the
larger IDP-1200 display panel. Using the drilling dimensions shown in Figure 68, drill new holes
for relocation of the doorstop assembly (shown in Figure 70).
8. Attach the hinge and mounting bracket, supplied with the IDP-1200, to the stiffener. (Use the
screws removed during steps 4 and 5.) Install the rubber grommet on the mounting bracket.
Figure 69 shows the assembly detail.
IDP-1200 Mounting