Basler Electric IDP-1200 - Manual (Page 65)

9437200990 Rev C 57
MEL or the UEL curve. The horizontal capability curve screen is shown in Figure 65. A vertical curve is
also available.
Figure 65. Capability Curve Screen
Task Guide
Table 7 lists common tasks along with the IDP-1200 pages that provide the controls for performing the
tasks.
Table 7. Tasks and Screens Cross-Reference
Task Screen
Close ac breaker Control
Flash the field N/A, field is flashed automatically
when ac field breaker is closed.
Place regulator in Auto or Manual
mode Control
Raise or lower voltage Control
Var
Change the controlling channel Transfer Control
Change Local/Remote control Control
View alarms Any page
Acknowledge alarms Alarm/Fault – Active
Alarm/Fault – History
Password Settings
The default, level 2 password is “4321”. Use the following procedure to change the security password. A
USB flash drive is required to change the password.
1. Create a CSV (comma-separated values) file named “Security.csv” that has its content structured
as shown in Table 8. Place the new password where “New” is shown in the table. Passwords are
IDP-1200 IDP-1200 Operation with DECS-2100 and DECS/RW