Avery Dennison TTX 450 - Manual (Page 9)

User Manual
TTX 450/650/950/1050 – Puma/Lion/Tiger/Tiger XXL – TDI/STDI/XXtreme –
S45/65/95/105
05/08 Rev. 2.14 9
PCMCIA card pin assignment
Memory types
PROM card (Programmable Read Only Memory)
Programmable only with a special program unit (EPROM burner) – it is a on time card,
normally used to store fonts and logos witch are used again and again in the same shape
size or look like. The card will be programmed in the factory due to the customer wishes.
Memory size and capacity depends to the printer.
EPROM card (Erasable Programmable Read Only Memory)
Programmable only with a special program unit (EPROM burner) – it is a on time card,
normally used to store fonts and logos witch are used again and again in the same shape
size or look like. The card will be programmed in the factory due to the customer wishes. The
difference between EPROM and PROM card is that the EPROM card can be cleared by
using ultra violet light.
Is not used in our printer.
EEPROM or E²PROM (Electric Erasable Programmable Read Only Memory)
The function is similar to an EPROM card – to clear the memory there is no light used, it
works with electric power. The clear procedure is very slow. The data are hold in the memory
after power down – without battery !
Is not used in our printer.
Pin 1
Pin 35
Pin 34
Pin 68