Avery Dennison TTX 450 - Manual (Page 22)

User Manual
TTX 450/650/950/1050 – Puma/Lion/Tiger/Tiger XXL – TDI/STDI/XXtreme –
S45/65/95/105
05/08 Rev. 2.14 22
Short Tag Option
- for TDI / XXTREME / S TDI-
This option is used to handle short label (between 50 mm and 105 mm). The short tag option
is a second feed system driven by the main feed roller. A belt is connecting the main feed
roller with the short tag option. The label is transported from the separator to the short tag
option and from there to the feed section of the printer.
Attention: The option can be mounted to a printer by a service technician from a defined
serial number on ! From serial number SN 6800131605 on you can upgrade the
unit definitely ! This can only be done by a service technician.
Activate the shot tag option under menu point SECF (select YES)
Fonts
Most the fonts used in the printer firmware are proportional – only the OCR fonts are non
proportional. This is given by the specs of this fonts.
Proportional font this means that all characters have a specific width
Non proportional font all characters have the same width
OFF
INFO PRTP IFAC SYSP
EMUL
NACH
SENS
PUNS
FMOD
OMOD
SMOD
MMOD
LPOS
SECF
YES?