Avery Dennison TTX 450 - Manual (Page 35)

User Manual
TTX 450/650/950/1050 – Puma/Lion/Tiger/Tiger XXL – TDI/STDI/XXtreme –
S45/65/95/105
05/08 Rev. 2.14 35
Technical Specification TDI
Print technology Thermal-and Thermal Transfer Print
Print head „Near Edge Type“ print head, high resolution, fast, with integrated
temperature control.
Print speed 100 up to 250 mm/s in steps of 25,4 mm/s (1 “/s)
Resolution 12 Dots/mm (300 dpi)
Effective print width 128 mm
Imprint exactness Up to 100 mm label length: +/- 1 mm in X and Y direction
More than 100 mm label length: 1% of the label length
Label size Width: 25,2 (short tag 50mm) up to 154 mm
Length: 105 mm (short tag 50mm) up to ca. 350mm
Label length 105 mm up to max. printing length (standard device)
50 mm up to max. printing length (Short Tag option)
The max. printing length depends on the following points:
– Firmware intalled to the printer (standard or extended, furthermore of
the version of the respective firmware)
– Use of bar code cards
– Use of image cards
Depending on the combination of firmware, bar code card and image
card results a different maximum print length.
Firmware Plug-in card Max. printing
length
none 301 mm (324 mm*) Standard (1H..)
Bar code card 242 mm
none 245 mm
1 x 1 MB S-RAM 339 mm
1 x 2 MB S-RAM 679 mm
2 x 2 MB S-RAM 1359 mm
Extended (1X..)
Bar code card 197 mm
Tab. 1: The max. printing length can be extended by aid of S-RAM cards; assuming
that the special "extended firmware" (code 1X..) is installed. This firmware
takes more memory space than the standard firmware, that´s why the max.
printing length with extended firmware and without plugged-in S-RAM card
is even lower than with standard firmware.
*) with spooler set to 8 KB (standard: 65 KB)
¯
Be aware, that the max. printing length may vary from one firmware
version to the next. Adding features to the printer means often taking
away some millimeters of printing length from the image buffer!
P For detailed information on the different firmware versions refer to the
service manual, topic section "Firmware", "Firmware Versions".
P For details about applying plug-in cards refer to the cards manual.