Avalon Firestyles DVL Fireplace-1999 to 2002 - Manual (Page 23)

Installation
(for qualified installers only)
2 1
Travis Industries
4 0 2 0 8 1 2
9 3 5 0 8 1 1 0
Top Vent Configuration
! The vent must maintain the required clearance to combustible materials to prevent a fire (see
“Clearances” below). Do not fill air spaces with insulation.
! The gas appliance and vent system must be vented directly to the outside of the building, and never
be attached to a chimney serving a separate solid fuel or gas-burning appliance. Each direct vent gas
appliance must use it's own separate vent system.
Installing the Top Vent Adapter (shipped with the fireplace)
1/4" Nutdriver
a
b
Remove the top vent
exhaust cover with
gasket and discard
7/16" Wrench
c
d
Apply a 1/8" thick bead of high-
temperature (600° F.) silicone to
the inside of the exhaust vent.
Install the top
vent adapter.
1/4" Nutdriver
Remove the top vent
convection cover.
Silicone
e
f
Install the top
vent seal plate.
Remove the top vent
cover and discard.
Remove the top vent
seal plate.
g