Avalon Firestyles DVL Fireplace-1999 to 2002 - Manual (Page 20)

1 8
Installation
(for qualified installers only)
Travis Industries 4 0 2 0 8 1 2 9 3 5 0 8 1 1 0
Altitude Considerations (Rear Vent Configuration)
This heater has been tested at altitudes ranging from sea level to 8,000 feet (2,400 M). In this testing we have
found that the heater, with its standard orifice, burns correctly with just an air shutter adjustment.
! Failure to adjust the air shutter properly may lead to improper combustion which can create a safety hazard.
Consult your dealer or installer if you suspect an improperly adjusted air shutter.
Approved Vent Configurations (Rear Vent Configuration)
• The vent must terminate horizontally.
• Maximum 6’ of Vent Length (not including elbow and termination)
• 1 Elbow Maximum (45° or 90°)
DVL Fireplace
One Elbow Maximum
(90° or 45°)
Maximum 6' Length
(determined by adding H1 + H2)
Maximum 6' Length
H1
H2
Approved Vent Components for Rear Vent Configuration
Description Part # Packing List
Straight Installation Kit 98900170 Rear Vent Adapter
Wall Thimble
Horizontal Vent Termination (Cap)
Corner Installation Kit 98900171 Rear Vent Adapter
45° Elbow
7” Adjustable Vent Length
Wall Thimble
Horizontal Vent Termination (Cap)
7” Adjustable Vent Length 98900172 7” Adjustable Vent Length
24” Vent Length 98900173 24” Vent Length
36” Vent Length 98900174 36” Vent Length
12” Adjustable Vent Length 98900175 11-9/16” to 15-3/8” Adjustable Length
Horizontal Termination Cap 98900176 Cap
45° Elbow 98900177 45° Elbow
90° Elbow 98900178 90° Elbow
Wall Thimble 98900179 Wall Thimble (two mating pieces)
Vinyl Siding Standoff 98900180 10” Vinyl Siding Standoff
Rear Vent Adapter 98900181 Rear Vent Adapter