Artesyn COMX-P40x0 ENP2 Installation and Use (January 2015) - Manual (Page 129)

BSP
COMX-P40x0 ENP2 Installation and Use (6806800R95C) 129
 Test that the network and filename settings can download the files successfully.
Example:
=> tftpboot $loadaddr $rcwfile
=> tftpboot $loadaddr $fmanfile
=> tftpboot $loadaddr $bootfile
=> tftpboot $loadaddr $norfsfile
=> tftpboot $loadaddr $fdtfile
=> tftpboot $loadaddr $ubootfile
7.22.2 Deploying BSP Images on NOR FLASH
Following are the steps to deploy BSP images on NOR FLASH:
1. Upgrade RCW, FMAN uCode, kernel, RAMDISK image, U-Boot and DTB on NOR FLASH
individually. Example:
=> run updrcw; run updfman; run updkernel; run updnorfs; run
updfdt; run upduboot
2. Erase previous U-Boot environment settings using the => run eraenv command.
3. Reset the board using the => reset command. The board will boot up with new BSP.
7.23 Boot
COMX-P40x0 ENP2 provides the following boot methods:
 RAMboot
 NORboot
 NANDboot
 NFSboot
 USBFATboot and USBEXT2boot
 MMCFATboot and MMCEXT2boot