Artesyn COMX-P40x0 ENP2 Installation and Use (January 2015) - Manual (Page 114)

BSP
COMX-P40x0 ENP2 Installation and Use (6806800R95C) 114
 brd me 00
 brd ms 4096
 brd md 'ComExpress module on P4080(1.5GHz)'
 brd ma 'Emerson Network Power'
 brd save
7.15.3 Real Time Clock (RTC) and Watchdog Timer (WDT)
The COMX-P40x0 ENP2 module uses RTC and Watchdog features on M41ST85W. The I2C
RTC/WDT M41ST85W (U12) is adopted on the COMX-P40x0 ENP2 and located on I2C<1>.
Boot up message in the U-Boot will be as follows: "RCT: M41ST85W@68" and "WDT:
M41ST85W@68(disabled)".
U-Boot provides "date" commands to operate the RTC features. These include get/set/reset
date and time.
The following are usage samples for "date" on the COMX-P40x0 ENP2.
 date
Date: 2010-12-01 (Wednesday) Time: 17:57:37
 date reset
Reset RTC
Date: 2010-18-01 (Sunday) Time: 0:00:00
 date 120117592010.00
Date: 2010-12-01 (Wednesday) Time: 17:59:00
date [MMDDhhmm[[CC]YY][.ss]]
date reset
without arguments: Prints date and time
with numeric argument: Sets the system date and time
with ’reset’ argument: Resets the RTC