Artesyn COMX-P40x0 ENP2 Installation and Use (January 2015) - Manual (Page 125)

BSP
COMX-P40x0 ENP2 Installation and Use (6806800R95C) 125
BSP Images
SCP-P4080-2G-ENP2 BSP images should be placed in /local/tmp/. It includes the
COMX_P4080_.tar.gz
package:
The COMX_P4080_.tar.gz package contains:
 comx.dtb
: Device Tree Blob
 fsl_fman_ucode_P3_P4_P5_101_8.bin
: FMAN uCode
 rcw.bin
: RCW
 rcw-codewarrior.bin
: RCW used for code warrior to burn image to NOR Flash
 rootfs_ext2.img
: RAMDISK image

rootfs_nfs.tar.gz
: NFS rootfs
 u-boot.bin
(U-Boot)
 uImage
: Linux kernel image
7.21.1 Build U-Boot
The U-Boot is based on SDK1.0 whose version is U-Boot 2011.06-rc2.
Commands
1. Build by default
 make uboot
2. Build Targets supported for U-Boot
 uboot
: configures and builds u-boot.bin for NOR flash
 uboot-clean
: cleans the U-Boot
Output
The built image is u-boot.bin in the current working directory.
7.21.2 Build Linux Kernel
The Linux kernel is based on SDK1.0 whose version is 2.6.34.6.