Artesyn COMX-P40x0 ENP2 Installation and Use (January 2015) - Manual (Page 113)

BSP
COMX-P40x0 ENP2 Installation and Use (6806800R95C) 113
7.15.2 Board EEPROM
An I2C EEPROM AT24C512 (U2001) is used as the BOARD EEPROM, located on I2C<1>. The
COMX-P40x0 ENP2 module uses BOARD EEPROM to store information about the board’s
processor family, module family and configuration, among others. Boot up message in U-Boot
will appear as "EEPROM: COMX".
The U-Boot provides "brd" utilities to display and program the data in BOARD EEPROM.
The following are usage examples of "brd" on the COMX-P40x0 ENP2 module.
 brd id
 brd pf P4080
 brd pv B
 brd pe 00
 brd mf COME1
 brd mv GA
brd [read|save|id|pf|pv|pe|mf|mv|me|ms|md|ma]
read Shows content of EEPROM
brdsave Saves to the EEPROM
brd id Programs board id
brd pf Programs processor family
brd pv Programs processor version
brd pe Programs processor errata
brd mf Programs module family
brd mv Programs module version
brd me Programs module errata
brd md Programs module description string
brd ms Programs memory size
brd ma Programs manufacturer string