8 cpu, Figure 7-1, Comx-p4080 cpu information – Artesyn COMX-P40x0 ENP2 Installation and Use (January 2015) User Manual

Page 103

BSP

COMX-P40x0 ENP2 Installation and Use (6806800R95C)

103

4. U-Boot Version



Run the command "version" after the first line of the U-Boot boot-up message
=> version

U-Boot 2010.06-COMX_P4080_V100R00 (Nov 29 2010 - 16:24:12)

5. JFFS2 rootfs version



In the U-Boot, boot with nandboot (’run nandboot’). In Linux, run ’cat
/etc/.version

’

[root@COMX-P4080 root]# cat /etc/.version

COMX-P4080 JFFS2 ROOTFS for nand.full FLASH ver:

COMX_P4080_V100R00 build by [email protected] on

Mon Nov 29 08:47:50 UTC 2010

6. NFS rootfs version



In the U-Boot, boot with nfs (’run nfsboot’). In Linux, run ’cat/etc/.version’.
[root@COMX-P4080 root]# cat /etc/.version

COMX-P4080 NFS ROOTFS ver: COMX_P4080_V100R00 build by

[email protected] on Mon Nov 29 08:50:20 UTC 2010

7.8

CPU

The COMX-P4080 module has the Freescale QorIQ Communications Processor. The CPU
information can be viewed in the terminal. Figure 7-1 below shows console output containing
an example of the CPU information.

Figure 7-1

COMX-P4080 CPU Information