Artesyn COMX-P4080 Installation and Use (August 2014) - Manual (Page 78)

Maps and Registers
COMX-P4080 COM Express Module Installation and Use (6806800L20C) 78
0x11_D000 DUART controller 2 UART3: 0x11_D500 (DUART2)
UART4: 0x11_D600 (DUART2)
0x11_E000–0x12_3FFF Reserved -
0x12_4000 Enhanced local bus controller (eLBC) -
0x12_5000–0x12_FFFF Reserved -
0x13_0000 GPIO controller -
0x13_1000–0x13_7FFF Reserved -
0x13_8000 Pre-boot loader (PBL) Software cannot write to the PBL
CCSR space directly. However,
special PBL commands may be
leveraged during pre-boot
initialization by referencing
specific CCSR offsets (unique
commands have unique CCSR
offsets).
0x13_9000–0x1F_FFFF Reserved -
0x20_0000 PCI Express controller 1 -
0x20_1000 PCI Express controller 2 -
0x20_2000 PCI Express controller 3 -
0x20_2000–0x20_FFFF Reserved -
0x21_0000 USB 1 (host only) -
0x21_1000 USB 2 (dual role) -
0x21_2000–0x2F_FFFF Reserved -
0x30_0000 SEC 4.0 -
0x31_0000–0x31_3FFF Reserved -
0x31_4000 Security monitor -
0x31_5000–0x31_5FFF Reserved -
0x31_6000 Pattern match engine (PME) -
0x31_7000–0x31_7FFF Reserved -
0x31_8000 Queue manager (QMAN) -
Table 5-4 CCSR Block Base Address Map (continued)
Block Base Address (Hex) Block Comments