Artesyn COMX-P4080 Installation and Use (August 2014) - Manual (Page 119)

Chapter 8
COMX-P4080 COM Express Module Installation and Use (6806800L20C) 119
Firmware Upgrade
8.1 Overview
This section describes in detail the procedures on how to upgrade the COMX-P4080 COM
Express Module firmware.
8.2 Upgrade Procedure
1. Go to http://www.artesyn.com/computing
2. Navigate to the Customer Resource Center. First time visitors will need to register for a CRC
account.
3. Download the latest BSP package COMX_P4080_.tar.gz. The version
number is formatted as VxxxBxx or VxxxRxx (for example: V100B13, V100R00).
4. Attach the board to the network using a network cable to the onboard RGMII Ethernet
port.
5. Set up a TFTP server in this network. Assuming that the IP address of this server is
192.168.0.100 and the root directory is /tftpboot/. Create a subdirectory
comx_p4080/
in /tftpboot/.
6. Copy the released file COMX_P4080_.tar.gz into the directory
/tftpboot/comx_p4080/
on this server.
7. Change current directory to /tftpboot/comx_p4080/.
8. Decompress the .tar.gz file to the current directory. The following files should be present:
 comx.dtb
 rcw.bin
 rootfs_ext2.img
 rootfs_nfs.tar.gz
 uImage
 fsl_fman_ucode_P4080_101_6.bin
 ReleaseNotes.txt
 rootfs_jffs2.nand
 u-boot.bin