Introduction, 1 features, Table 1-1 – Artesyn COMX-P4080 Installation and Use (August 2014) User Manual
Page 23: Comx-p4080 features summary, Chapter 1

Chapter 1
COMX-P4080 COM Express Module Installation and Use (6806800L20C)
23
Introduction
1.1
Features
COMX-P4080 COM Express Module is based on the Freescale P4080 processor. COM Express is
an industry-standard embedded computer module defined by PICMG.
The following table summarizes the features of COMX-P4080, including those of its variants.
Table 1-1 COMX-P4080 Features Summary
Function
Features
Form-factor
Basic (95 mm x 125 mm)
Processor
Supports QorlQ P4080 integrated processor running at the
speed of 1.5 GHz
Combines eight Power Architecture processor cores
Supported CPU
P4080/P4040
P5020/P5010
P3041
Boot options
16-bits width NOR flash from local bus (default)
NAND flash from local bus
SPI flash
I2C EEPROM
Operating system
Linux
VxWorks
Memory
Dual DDR3 SDRAM slots (for P4080/P4040/P5020/P5010)
Supports up to 4 GB memory with ECC (for
P4080/P4040/P5020/P5010)
For P3041: Single DDR3 slot, 2 GB memory with ECC
SERDES
For P4080/P4040: 12 lanes of SERDES routed to the COM-E
connectors, which can be configured as PCIE, XAUI, SRIO, and
SGMII.
For P5020/P5010 and P3041: Two additional SATA interfaces
routed through the COM-E connectors
UART
4 UART or 2 DUART
LAN
P4080/P4040: One Gigabit ethernet port
P5020/P5010 and PP3041 Two Gigabit ethernet ports