Artesyn COMX-P4080 Installation and Use (August 2014) - Manual (Page 62)

Functional Description
COMX-P4080 COM Express Module Installation and Use (6806800L20C) 62
ON,ON,ON,ON,OFF 16-bit NOR flash as boot location;
RGMII FM1 MAC1 and dual 4-pin UART enabled;
Platform ratio of 8:1;
Core PLL ratio of 14:1
ON,ON,OFF,OFF,OFF Three (x2, x2, x4) PCI-E @ 2.5G, 100 MHz ref clk, all agent mode;
All cores in boot hold-off;
Dual 4-pin UART enabled
ON,ON,OFF,OFF,ON Two (x4, x4) SRIO @ 2.5G, 100 MHz ref clk, all agent mode;
All cores in boot hold-off;
Dual 4-pin UART enabled
ON,ON,OFF,ON,OFF Large page NAND flash as boot location;
USB2 and dual 4-pin UART enabled;
Platform ratio of 6:1;
Core PLL ratio of 10:1
ON,ON,OFF,ON,ON Large page NAND flash as boot location;
RGMII FM1 MAC1 and dual 4-pin UART enabled;
Platform ratio of 6:1;
Core PLL ratio of 10:1
ON,OFF,ON,OFF,OFF 16-bit NOR flash as boot location;
USB2 and dual 4-pin UART enabled;
Platform ratio of 6:1;
Core PLL ratio of 10:1
ON,OFF,ON,OFF,ON 16-bit NOR flash as boot location;
RGMII FM1 MAC1 and dual 4-pin UART enabled;
Platform ratio of 6:1;
Core PLL ratio of 10:1
ON,OFF,ON,ON,OFF Three (x2, x2, x4) PCIeX @ 2.5G, 100MHz ref clk, all agent mode;
All cores in boot hold-off;
Dual 4-pin UART enabled;
Platform ratio of 6:1
Core PLL ratio of 10:1;
Table 4-6 RCW Hard-Coded Configuration Options (continued)
S2.1-S2.5 RCW hard-code configuration options