Argox AS-9500 - Manual (Page 79)

78
EAN/JAN-13
Addenda
This selection adds 2 or 5 digits to the end of all scanned
EAN/JAN-13 data.
Addenda Required
When Addenda required is set to on, the imager will only read
EAN/JAN-13 bar codes that have addenda.
Addenda Separator
When this feature is on, there is a space between the data from the
bar code and the data from the addenda. When turned off, there is
no space.
Addenda
2 Digit Addenda On
5 Digit Addenda On
*2 Digit Addenda Off
*5 Digit Addenda Off
Addenda Required
Required
*No Required
Addenda Separator
*On
Off