Argox AS-9500 - Manual (Page 132)

131
To create this template, you would enable the OCR-A font. Scan
the Enter OCR Template symbol. Scan the d from the OCR
Programming Chart in the back of this manual three times. Then
scan 414243 from the inside back cover (the hex characters for
“A,” “B,” and “C”), and scan the d three more times. Scan Save
OCR Template. This would let you read any string of three digits,
“ABC,” then any string of three digits, for example:
Adding Spaces
You may also need to put spaces in your template.
Example: You need to read three digits, space, three specific
characters (ABC), space, three digits. The template would be:
To create this template, you would enable the OCR-A font. Scan
the Enter OCR Template symbol. Scan the d from the OCR
Programming Chart in the back of this manual three times, then
scan 2041424320 from the inside back cover (the hex characters
for “space,” “A,” “B,” “C,” “space”). Scan the d three more times,
then scan Save OCR Template . This would let you read any
string of three digits space, “ABC,” space, then any string of three
digits. For example:
Note: If using Quick*View to program, use the space bar to
designate a space and not the hex value of 20.4. Exit OCR
Template Editor Scan Save OCR Template to save your entries.
Discard OCR Template exits without saving any OCR Template
changes.