Argox AS-9500 - Manual (Page 116)

115
Alternate Data Formats
Alternate formats allow you “single shot” capability to scan one
bar code using a different data format than your primary format.
When data formats are programmed, you must input whether you
are programming the primary format, or an alternate format
numbered 1, 2, or 3. An alternate format is initiated by scanning
one of the 3 alternate format bar codes below. The imager will
scan the next bar code, formatting the data with the selected
alternate format, then revert immediately to the primary format.
Alternate Data Format 1
Alternate Data Format 2
Alternate Data Format 3