Argox AS-9500 - Manual (Page 40)

39
Indication
Number of Beeps
The number of beeps of a good read can be programmed from 1 -
9. The same number of beeps will be applied to the beeper and
LED in response to a good read. For example, if you program this
option to have five beeps, there will be five beeps and five LED
flashes in response to a good read. The beeps and LED flashes are
in sync with one another. To change the number of beeps, scan the
bar code below and then scan a digit (1-9) bar code and the Save
bar code.
Good Read Delay
This sets the minimum amount of time before the imager can read
another bar code. Default = No Delay.
User-Specified Good Read Delay
If you want to set your own length for the good read delay, scan
the bar code below, then set the delay (from 0-30,000 milliseconds)
by scanning digits from the inside back cover, then scanning Save.