Argox AS-9500 - Manual (Page 112)

111
• Clear One Data Format
This deletes one data format for one symbology. If you are
clearing the primary format, scan 0 . If you are clearing an
alternate format, scan 1, 2, or 3, depending on the alternate format
you are clearing. Scan the Interface Type and Code I.D. , and the
bar code data length for the specific data format that you want to
delete. All other formats remain unaffected.
• Save: This exits, saving any Data Format changes.
• Discard : This exits without saving any Data Format changes.
Enter Data Format
Clear One Data Format
Save
*Default Data Format
Clear All Data Formats
Discard