Argox AS-9500 - Manual (Page 44)

43
Thermal and Centering
If a bar code is not within the predefined window, it will not be
decoded or output by the imager. If centering is turned on by
scanning Centering On, the imager only reads codes that intersect
the centering window you specify using the Top, Bottom, Left, or
Right bar codes. Scan Centering On, then scan one of the
following bar codes to change the top, bottom, left, or right of the
centering window. Then scan the percent you want to shift the
centering window using digits on the inside back cover of this
manual. Scan Save. Default Centering = 40% for Top and Left,
60% for Bottom and Right.
Centering On
Top of Centering Window
Left of Centering Window
*Centering Off
Bottom of Centering Window
Right of Centering Window