Argox AS-9500 - Manual (Page 56)

55
Codabar
Concatenation
Codabar supports symbol concatenation. When you enable
concatenation, the imager looks for a Codabar symbol having a
“D” start character, adjacent to a symbol having a “D” stop
character. In this case the two messages are concatenated into one
with the “D” characters omitted. Default = On.
Select Require to prevent the imager from decoding a single
“D” Codabar symbol without its companion. This selection
has no effect on Codabar symbols without Stop/Start D
characters.
Message Length
Scan the bar codes below to change the message length. Minimum
and Maximum lengths = 2-60. Minimum Default = 4, Maximum
Default = 60.
Message Length
*On
Require
Maximum Message Length
Off
Minimum Message Length