Argox AS-9500 - Manual (Page 135)

134
Reading Multi-Row OCR
The AS-9500 is capable of decoding multi-row OCR text.
Note: Reading rows longer than sixteen characters is not
recommended. Example: You need to read multiple rows of
OCR-A data as shown below:
First, enable the OCR-A font. To read the first row of OCR
data, you would program the following template:
OCRTMP"dddddddd". This template is the default OCR
template. If you wanted to read the second line of data, you
would use the following template:
OCRTMP"llllllll". To read both lines of OCR at one time,
use the variable r to indicate the start of a new row. All the
other templating variables for the individual rows work the
same as previously described. For instance, in the above
example, you would use the following template to read
both rows:
OCRTMP"ddddddddrllllllll".
To read the three rows below, you would use the template
command
"OCRTMP"ddddddddrllllllllrlllldddd".