Argox AS-9500 - Manual (Page 17)

16
Interface Selection
This decoder built-in scanner comes in one model and
supports interfaces such as RS232 serial, USB virtual COM
and USB HID. In most of the cases, simply selecting an
appropriate cable and configure the proper interface by following
interface selection.
Interface selection: You can change factory interface default
(USB HID) for other type interface. By plugging different cables,
setting right interface, then scan the interface barcode, power cycle
the scanner will be changed to another interface. However, you
must make sure which cable you need.
RS-232 Interface
*USB HID (PC)
USB HID (MAC)
USB Virtual COM