Xtramus NuWIN-RM V1.4 - Manual (Page 93)

93
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
8.9.2. Tx Rate Control
You can set the transmitting rate control mode with the Tx Rate Control scroll-down menu.
Tx Rate Control
Auto Generated Tx Rate
When the Tx Rate Control is set to Auto Generated Tx
Rate, you will have to input the Line Rate on the Main
Display of every stream manually.
Manual Input Rate
When the Tx Rate Control is set to Manual Input Rate, you
will have to input the Tx Frame/Gap Control on the Main
Display manually.
Capped Balance Tx Rate
When the Tx Rate Control is set to Capped Balance Tx
Rate. You only need to set the Total Line Rate (Mbps) of all
streams, and then the system will automatically assign the
line rate for each port.