Xtramus NuWIN-RM V1.4 - Manual (Page 57)

57
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
Pair – Assigning Ports
1. To add an available port for Pair
Network Mode, click the port and
press the > button as shown in the
picture on the left. If you would like to
add all ports, please press the >>
button.
2. The port you ’ve assigned will be
displayed on the Ports field. If you
would like to remove that port, click
the < button. If you would like to
remove all ports, click the << button.
3. You can view the MAC Address and
IPv4 Address of the assigned ports.
You can manually input the IPv6
Address by double click the IPv6
Address column.
4. Press the Apply button to apply all the
settings you ’ve made.
Pair –Stream Setting
You can configure the streams of
the assigned ports here.
Press the Apply button to apply all
the settings you ’ve made.