Xtramus NuWIN-RM V1.4 - Manual (Page 92)

92
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
8.9.1. Control Buttons
These buttons allow you to save the current settings, load previously saved settings, apply the default
settings, set frame length steps and get DUT MAC address. Please refer to the section down below for
more detail descriptions regarding to Control Buttons.
Control Buttons Descriptions
The Save button allows you to save the current settings to “*.nrx” format files.
The Load button allows you to load previously saved settings. Please note that the settings
you load should be in
“*.nrx” format.
The Default button allows you to load the default stream generation settings.
After pressing the View button, a View Settings window
will pop up, showing the stream options. You can
hide/show these options by check/uncheck the check
boxes of these options. The checked items will be
displayed in the Main Display area.
After pressing the Length Step button, a
Length Step Setting window will pop up,
showing the frame lengths of different steps.
You can set the frame length for each step
here.
Press OK to save all the changes you ’ve
made and exit or press Cancel to directly
exit.
For detailed information about Get DUT MAC, please refer to 6.10.1. Get DUT MAC.