Xtramus NuWIN-RM V1.4 - Manual (Page 73)

73
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
6.6. Capture Buffer
You can access the Capture Buffer by:
Accessing Capture Buffer
 Click Capture Buffer on the Module Info/Configuration List

Press Capture Buffer on the menu bar.
All available ports will be displayed on the Reserved Ports list in the format of (X, Y, Z), where (X, Y, Z) is
module card ’s port ID. The Capture Buffer window mainly contains two kinds of tab menus, which are
Control Panel and Port ID Tab (named by the port ID). For detailed description of the two tab menus,
please refer to the section down below.