Xtramus NuWIN-RM V1.4 - Manual (Page 39)

39
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
B. SDFR
SDFR (Self-Discover Filtering Rules) is a technology that makes packet capturing/filtering over
Ethernet easy and convenient. SDFR parameters include filter of Layer 3 Destination IP Address (DIP)
and Source IP Address (SIP)
Each filter is independent and can be activated in any combinations. You can choose the criteria by
clicking the check boxes.
You can set and input the value of DIP and SIP on the upper-right part of the SDFR Menu. The value of
SDFR parameters can be set as Single, Pair, and Range. The following descriptions will use DA as
example.
 Single: A single value will be used as SDFR parameter.
 Pair: Two values will be used as SDFR parameters.
 Range: Values within the range of the two values set here will be used as SDFR parameters.

C. Result
The Result page will display the settings you ’ve made in Protocol and SDFR pages.