Xtramus NuWIN-RM V1.4 - Manual (Page 38)

38
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
6.2.2.2 Capture Criteria
When clicking Capture Criteria, a Port (X, Y, Z): Capture Criteria window will pop up, where (X, Y, Z) is
the module card
’s port ID. You can set packet capturing criteria for the designated port here on the pop-up
Capture Criteria window.
The Capture Criteria contains 3 menu tabs: A. Protocol, B. SDFR, and C. Result. Please see the
sections down below for details.
A. Protocol
Protocol allows you to set the criteria for packet capturing.
 Capture All Packets: Click this check box to capture all packets.
 Criteria: The capture criteria supported here includes Pause Packet, ARP, ICMP, CRC Error,
IPv4 Checksum Error, Oversize, and Under 64 Bytes.