Xtramus NuWIN-RM V1.4 - Manual (Page 41)

41
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
C. X-TAG Offset
X-TAG is a 12-byte tag developed by Xtramus, embedded in the transmitted packets, which is an
enhance measure to check the validation of data transmission on the network. When the starting position
of the X-TAG in the received packet by the other port of the two communication ends coincides with the
Byte set in Check Offset, then the data transmission between the two communication ends is supposed
to be validate. The Byte in Check Offset should be set based on the Byte in Tx Offset.

Tx Offset: Set the starting position of the X-TAG in the transmitted packet from the scroll down
menu.
 Check Offset: Set the starting position of the X-TAG in the received packet from the scroll down
menu. Auto Check means the system will automatically select the right Byte for this function.
D. BERT
BERT stands for Bit Error Rate Test.
 Transmit BERT: Adding BERT patterns to transmitted packets if this is enabled.
 Check BERT: NuWIN-RM will check if BERT patterns are in received packets.