Xtramus NuWIN-RM V1.4 - Manual (Page 77)

77
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
6.7. Group Setup
You can access the Group Setup by:
Accessing Group Setup
 Click Group Setup on the Module Info/Configuration List
Group Setup
If you click Group Setup from the Module Info/Configuration List, the Main Display Screen will
display Group ID Setup as shown in the picture above.
You can assign a group ID number to reserved ports for test managements here. To assign an ID to the
designated port, please click the number you would like to assign.
For example, to assign port (0, 2, 1) to group 1, please click the group number .