Xtramus NuWIN-RM V1.4 - Manual (Page 82)

82
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
6.9. DUT Clock Measurement
The DUT Clock Measurement function tests the crystal o
scillator’s frequency of the DUT and checks if
it’s either faster or slower than standard speed in ppm scale.
Accessing DUT Clock Measurement
 Click DUT Clock Measurement on the Module
Info/Configuration List

Press DUT Clock Measurement on the Quick Launch Buttons.
A DUT Clock Measurement window will pop up, as shown in the picture down below.
The port you ’ve selected will be displayed on the main display screen located on the right side of the DUT
Clock Measurement window, as shown in the picture down below.
There are two tab-menus available for you on the DUT Clock Measurement window, including Report,
and (X, Y, Z). Please see the sections down below for more details.