Xtramus NuStreams-P6GW V1.0 - Manual (Page 65)

65
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
5.5.2. NuSet-MiniPG-UG Function – Menu Bar
The Menu Bar includes configuration options such as File, Upgrade, Language, and Help.
5.5.2.1. Menu Bar – File
File
Exit
Exit NuSet-MiniPG-UG.
5.5.2.2. Menu Bar – Upgrade
Upgrade
Firmware/FPGA
Upgrade
Before upgrading NuStreams-P6GW’s firmware/FPGA, please be sure that
NuStreams–P6GW and your PC are connected via USB cable all the time.
The following demonstrations will show you how to upgrade NuStreams-P6GW’s
firmware. Processes for upgrading NuStreams-P6GW’s FPGA are quite the
same and can be related.
1. To start upgrading NuStreams-P6GW’s firmware, click Upgrade →
Firmware Upgrade on NuSet-MiniPG-UG’s Menu Bar as shown in the figure
down below.
2. A message window will pop up, reminding you that all NuStreams-P6GW’s
settings will be reset to default after firmware upgrading. Please click Yes to
continue. Please note that all test logs stored in NuStreams-P6GW will be
erased as well.
3. Select where NuStreams-P6GW’s firmware file (in the format of “*.bin”) is
stored in your PC, then click “Open”.