Nustreams-p6gw overview, Nustreams-p6gw general description – Xtramus NuStreams-P6GW V1.0 User Manual
Page 6
6
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®
1. NuStreams-P6GW Overview
1.1. NuStreams-P6GW General Description
NuStreams-P6GW is a four-port stand-alone Switch /Residential
Gateway (Broadband Router) test device for testing switches and
broadband routers (along with their switch ports) at wirespeed with
its 4 Switch Ports, 1 WAN Port and Wireless Module. Also,
NuStreams-P6GW can be connected to PC for accessing its simple
and easy-to-use configuration utility.
Each of NuStreams-P6GW’s 3 RUNs contains 4 Tasks. These
Tasks allow users to simultaneously perform tests in 10M Full/Half,
100M Full/Half and 1000M Full with a single button. This innovative design can greatly reduce the time
consumed when performing product tests.
With 3 different Test Types (Router, Switch, and Router + Switch) available, NuStreams-P6GW can
perform tests on switch/router, or combining each of these test subjects under “Router + Switch” Test
Type, and test a broadband router’s WAN/LAN performance at the same time.
NuStreams-P6GW supports bi-direction LAN/WAN test packets with 253 IP addresses. Each IP has its
own settings and transmitting/receiving counters, including independent statistics and calculations for
latency and Serial Number. Also, both DUT and NuStreams-P6GW’s IP addresses can be any IP of 256
IP addresses from Class C.
Embedded with a Wireless Module that complies with IEEE802.11n Draft 2.0, NuStreams-P6GW can
connect to DUT wirelessly and perform wireless throughput tests.
NuStreams-P6GW comes with its own utility software. NuSet-MiniPG allows users to set DUT test
criteria, upgrading NuStreams-P6GW firmware/FPGA, and accessing detail test logs/statistics for further
analysis.
With the ability to provide high reliable test results and the best cost/performance ratio,
NuStreams-P6GW is the best solutions available for router and switch tests.