Xtramus NuStreams-P6GW V1.0 - Manual (Page 62)

62
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
Test Mode
3. Please select a port that will be
assigned as the destination port
from the Destination Ports field.
4. Press the > button to add the
pair you’ve made to the Pair
Ports field. If you would like to
remove a port pair setting, please
press the < button instead. If you
would like to remove all port pair
settings, please press the <<
button.
(Continued)
5. Please repeat step 2~4 until all
ports are paired, then press the
OK button to save all the settings
you’ve made.
Learning Setting
You can enable or disable network learning function here in this field.
VLAN Setting
You can enable or disable VLAN
functions for all the ports you’ve
selected. When VLAN function is
enabled, you can press the Setting
button to set the VID manually.
A VLAN Setting window will pop up,
allowing you to input VID (VLAN ID)
manually for each port. After inputting
VID for all the ports, please press the
OK button to save all the changes
you’ve made and exit VLAN Setting
pop-up window.