Vectronics VEC-884 - Manual (Page 47)

VEC-884 Owner's Manual
Advanced Features Error! Main Document Only.-7
2BP
• Normal filter: 2BP CF 300 BW 30 CF 3400 BW 30
• Overlapped filter:** 2BP CF 1000 BW 100
CW
• Filter without sidetone: CW CF 700 BW 30
• Filter with CW sidetone: CW CF 400 BW 50 CF 700 BW 30
• Overlapped filter:** CW CF 600 BW 100
SSB
• Normal filter: SSB CF 900 BW 1000
RTTY
• 2125-2295 Hz 45 baud: RTTY CF 2210 BW 250
HF PACKET
• 2125-2295 Hz 300 baud: PCKT CF 2210 BW 504
AMTOR
• 2125-2295 Hz 100 baud: AMTR CF 2210 BW 304
PACTOR
• 2125-2295 Hz 200 baud: PCTR CF 2210 BW 404
SSTV/FAX/WeFAX
• Non-adjustable: SSTV 1050-1350 1450-2350
Manual Notch
• Manual Notch On: MN L 150 R 3400
(when off, MN is not sent)
Automatic Notch
• On with aggressive level 3: AN 3
(when off, AN is not sent)
Noise Reduction
• On with control midrange: NR 5
(when off, NR is not sent)
* A filter is "limited" by the VEC-884 frequency range of 0-3900 Hz or
175 Hz minimum in SSB. The center frequency and bandwidth for
these filters are changed to reflect these limits. See the Limited Filters
section in Chapter 5.
** An "overlapped" filter occurs when two filters overlap each other
resulting in a single filter capable of passing all the frequencies of the
two filters. See the Overlapped Filters section in Chapter 5.