Vectronics AT-100 - Manual

AT-100 Active Antenna Owner's Manual
AT-100 ACTIVE ANTENNA
FEATURES
The compact Vectronics AT-100 Active Antenna provides amplified reception
of broadcast, short wave, or amateur radio signals from 300 KHz to 40 MHz. It
can be used with the supplied telescoping antenna or with an external wire
antenna of your choice.
The AT-100 provides gain, selectivity, and better
reception, both at home, and as a portable unit in the field.
SPECIFICATIONS
Front Panel Indicators
ON/OFF LED mounted on the front panel (activated when a
band is selected with the Band switch).
Front Panel Controls
Gain Control Adjusts Gain from -10 dB to +10 dB
Bypass Switch Selects bypass mode
Band Switch Six Position for OFF and 5 Bands from. 3 MHz to 40
MHz
Peak - Tune Control Maximizes the Gain for each of the 5 Bands
Rear Panel Connectors
Input SO-239 Connector
Output SO-239 Connector
AC Adapter IN 9-12 VDC Input @ 45 mA (3.5 mm plug)
Ground Wing-nut, rear panel
Other
Frequency Coverage
300 KHz to 40 MHz
Antenna 20" Telescoping Antenna - mounted through hole in
the top (connected to input SO-239 connector). An
external wire antenna plugged into the SO-239 input
requires the removal of the telescoping antenna.
Dimensions 2.5" H x 6.4" W x 3.3" D
Weight 1 lb.
1