Vectronics VEC-1613 - Manual

VEC-1613 Computer Interface
1
VEC-1613
RTTY, ASCII, CW, and WeFax
Computer Interface
General Information:
Congratulations on your purchase of the VEC-1613 RTTY, ASCII, CW, and
WeFax Computer Interface.
The VEC-1613 Computer Interface lets you use the powerful JVFAX and/or
HAMCOMM software to receive and decode many different types of digital data
communication signals, using your amateur transceiver. The VEC-1613
Computer Interface connects between your amateur transceiver or
communications receiver, and an IBM or compatible computer with a standard
RS-232C serial port.
The JVFAX software enables you to receive fabulous full-color FAX and Slow-
Scan Television images on your IBM or compatible computer. The JVFAX
software has features such as Image Viewing, Editing, Disk Storage, Auto-
Receive, Auto-Save, an Automatic Tuning Control, and Auto-Sync. The JVFAX
Movie Mode creates slideshow movies, using the images you have received.
The HAMCOMM software lets you receive digital signals such as Baudot,
ASCII, AMTOR ARQ and FEC, SITOR Modes A and B, NAVTEX, SHIP and
SYNOP. The HAMCOMM also has innovative features built-in, such as a
Spectrum Analyzer and a Tuning Scope.
The JVFAX and/or HAMCOMM software is included with the VEC-1613
package. However, for further information on these pieces of software, please
refer to the software documentation. Any questions related to either piece of
software should be referred to the software authors, and not
VECTRONICS.