Thuraya XT-DUAL - Manual (Page 92)

87
03 Using the menu
01
02
03
04
Connection type
The communication gateway can be WAP 1.0, WAP 2.0 or HTTP.
If WAP 1x gateway is used the IP address of the WAP gateway
should be provided and the port (which generally is 9201) should
be mentioned. If the operator uses WAP 2x proxy then the IP
address should be mentioned and the port (generally 9401)
should be mentioned.
If the operator does not use any WAP gateway (direct HTTP)
then the HTTP option should be selected.
IP address
IP address of the gateway (applicable if WAP 1.0 or WAP 2.0 is
selected).
Port
Port number of the gateway (applicable if WAP 1.0 or WAP 2.0
is selected).
To complete the new connection profile select
Option
>
Save
.