Appendix d: sms wake-up setting – NEXCOM VMC 1000 User Manual

Page 62

Text mode
Original mode

VMC 1000 User Manual

Appendix D: SMS Wake-up setting

Appendix D: SMS Wake-up setting

(13) Enter the “at!entercnd=”A710”, and the response would be “OK”.

(14) Enter the “at+wwkup=04” (to setup wake on SMS), and the
response would be “OK”.

(15) Enter the “at+wwkup?”, and the response would be “+WWKUP:
04” and “OK”. (It mean the setting is completed)

C. Return the default setting
(1) Lunch HyperTerminal. (Depending on your version of Windows and
how it was installed, you can launch the program by selecting Start ->
Programs -> Accessories -> Communications -> HyperTerminal

(2) Select the COM port to which the modem is connected (use COM6) in
the “Connect using” field, and click “OK

Note. SMS wake-up function only works in S3, S4 or S5 mode and the ignition off.