CIRCUTOR DISPENSER Series User Manual

Page 8

The

Dispenser Universal is the unit that is installed in the user's home. It is an energy meter

with the capacity to manage user consumption from a micro-grid according to the status of the

grid.

It is designed according to the EN 62053-21:2003 standard for active energy classes 1 and 2

and according to the UNE-EN 62053-23:2003 standard for measuring class 2 reactive energy.

Figure 1:Image of the Dispenser Universal

The unit features:

Display , which shows the information of the user's contract.

Two buttons, used to browse the display screens and recover the power supply in the

event of a power cut.
- 2 indicator LEDs: Verification and Pilot�
- RS-485 communications, with the MODBUS RTU® protocol
- 1 general relay output, which allows the activation/deactivation of the power supply.
-

1 auxiliary relay output, which allows the activation/deactivation of the secondary loads.

RFID card reader, used to load the contract generated in the DISPENSER-SOFT ap-

plication.

Dispenser Universal System

Instruction Manual