CIRCUTOR DISPENSER Series User Manual
Page 50
Figure 53:Create a new tariff (Schedule mode, Definition of the type of day)
Define the name of the type of day being designed,
Description.
Select the start time of the condition for each condition defined in section
Note: The start time of Condition 1 must always be 00:00.
Example: Using the example shown in Figure 53, Condition 1 will take effect at 00:00 of a
working day, Condition 2 will take effect at 10:00, Condition 3 at 12:00 and, finally, Condition 4
at 17:00, which will be active until 00:00 of the following day.
A
Calendar will be created after the types of days have been created so that the Dispenser
knows what type of day it is (Working day, Holiday, etc.).
The calendar can be divided into four seasons and the months of each season can be selected.
Once the season has been created, the types of days created previously are assigned to each
week.
5�- Energy blocks (See
3.5.2.2.- ENERGY BLOCK CONCEPT
To operate with Energy blocks (only in type 2 contracts), configure the values of the price of
energy of each block and the amount of energy after which the system will change from one
block to another in the window shown in
.
The period of time during which the block meter will reset the energy reading to start with Block
1 again can also be configured.
50
Dispenser Universal System
Instruction Manual