Resetting the dispenser, Changing the tariff of a subscriber – CIRCUTOR DISPENSER Series User Manual

Page 117

5.8.- RESETTING THE DISPENSER

To reset the

Dispenser, the user must insert a reset card that has been previously created with

the

DISPENSER-SOFT software into the unit reader (See

The unit is reset when a customer misplaces a card. The user must pay for the costs of the new

card.

Once the reset card has been read, the unit will have no active contract and be ready to read

a new contract.

5.9.- CHANGING THE TARIFF OF A SUBSCRIBER

If the subscriber wishes to change the tariff, the operator must follow these steps:

1�- Read the subscriber's card.

2�- Charge the remaining days and/or days of service in the card (if any).

3�- Delete the card.

4�- Write the desired new tariff in the card.

5�- Charge the desired amount of units and/or days for the new tariff.

117

Instruction Manual

Dispenser Universal System