CIRCUTOR DISPENSER Series - Manual (Page 17)

management features when purchasing energy.
 Type 4: EDA Flat rate. In this type of contract, the customer can consume a daily av-
erage amount of EDA units, which are only limited by the contracted power of the user.
Unlike the type 3 contract, the customer pays for the days of service. When this period
ends, the unit cuts off the power supply
All contracts have a power limit and a validity expiry date, i.e., if they are not activated before
this date, the Dispenser will not recognise the contract and not close the circuit breaker.
3�5�1�- TYPE 1 CONTRACT: FLAT RATE FOR POWER
Figure 11:Hydraulic diagram of Type 1 contracts
In the case of type 1 contracts, the customer freely consumes energy and is only limited by
the contracted power and power factors, which are applied according to the operating mode
of the micro-grid.
When the user exceeds the contracted power, the unit opens the general relay, cutting off the
power supply to the user.
To recover the power supply, the user must switch off some of its loads and press the
button
of the unit. The unit will cut off the power supply within a few seconds if these loads are not
switched off and the user presses the button.
17 Instruction Manual
Dispenser Universal System